PRIMELINE TOOLS GD 52110 Garage Door Roller, 1-7/8 in., Steel, Convex Edge,

Prime-Line Sliding Closet Door Roller Kit, 3/4 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction | Wayfair N 7533

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Sliding Closet... ... more

Prime-Line Sliding Closet Door Roller Kit, 3/4 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction | Wayfair N 7541

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Sliding Closet... ... more

Prime-Line Sliding Closet Door Roller Kit, 7/8 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction | Wayfair N 7531

This by-pass closet door repair kit includes four roller assemblies constructed of stamped steel brackets and plastic wheels. One pair of roller assemblies is for installation on the front sliding panels and have only a 1/4 in. offset. The other pair... ... more

PRIMELINE TOOLS GD 52145 Steel Slide Bolt Latch, with Keeper and Fasteners

This is a slide bolt latch made of heavy gauge, zinc plated steel. The slide bolt latch engages the mortise bolt keepers. Used with a variety of locks. •Used to secure garage doors or gates •Includes one surface mount keeper and one mortise bolt keeper... ... more

PRIMELINE TOOLS N 6531 Twin Pocket Door Roller, Top Mount (2 Pack)

This tandem roller assembly is constructed from nylon. It features an adjustable top mount design with round edge nylon wheels with a 1/2 inch nut. It fits Acme and other similar styled doors that are 3/4 inch to 1-3/4 inch thick. •Used as a pocket... ... more

PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel

This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... ... more

PRIMELINE TOOLS GD 52197 Bottom Lifting Brackets, Fits 7/16 in. Diameter Garage

These garage door lift brackets are constructed of heavy-duty 13 gauge stamped steel and come in a galvanized finish. Each set includes one left-hand and one right-hand bracket, and they are for use with sectional garage door systems constructed of... ... more

PRIMELINE TOOLS N 6870 Mirror Door Roller,3-3/4" L

This Prime-Line N 6870 Mirror Door Roller Assembly is constructed of a steel housing and a concaved (grooved) edge, plastic wheel. The housing has 2-1/2 inch mounting hole centers, its body measures 1-11/16 inch wide and its only 7/16 inch deep. This... ... more

PRIMELINE TOOLS N 6724 Closet Door Roller,3-3/4" L

The Prime-Line N 6724 Sliding Door Wheels Assembly is a four roller pocket door roller assembly used on Kennaframe pocket doors and a variety of other pocket door manufacturers. The pocket door assembly is affixed to an adjustable spring-loaded steel... ... more

PRIMELINE TOOLS GD 52106 Heavy Duty Standard Garage Hinge 3 in. width Door

This heavy-duty hinge is constructed from heavy-duty 14 gauge steel. The roller tube accepts a standard 7/16 inch diameter stem roller. This style hinge is used by most garage door manufacturers. •Used by most garage door manufacturers •Accepts a 7/16... ... more

PRIMELINE TOOLS GD 52105 Heavy Duty Standard Garage Hinge 3 in. W Door Leaf,

This is a heavy-duty 14 gauge galvanized steel hinge. The roller tube accepts a standard 7/16 inch diameter stem roller. Used by most garage door manufacturers. #2 position and center. •Easy to install •Used by most garage door manufacturers •Roller... ... more

PRIMELINE TOOLS N 6512 Wardrobe Door Front Roller Assembly, 1 in., Convex Nylon

This is a single wheel; top hung, side mounted adjustable roller bracket with a 1 inch convex nylon roller that fits onto the front wardrobe door panel. The stamped steel adjustable bracket has a 1/4 inch offset and fits onto a 3/4 inch to 1-3/8 inch... ... more

PRIMELINE TOOLS GD 12321 Torsion Spring,Deflection Angle 180 deg.

This Prime-Line GD 12221 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

PRIMELINE TOOLS GD 12322 Torsion Spring,Deflection Angle 180 deg.

This Prime-Line GD 12231 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

PRIMELINE TOOLS N 6649 Closet Door Roller, Back, 3/8 in. Offset, 7/8 in. Nylon

This roller assembly is constructed from nylon. It comes affixed to a 3/8 inch offset stamped steel bracket. It fits on doors that are 3/4 inch to 1-3/8 inch thick. •Used as closet door rollers for the front panel •For 3/4 inch to 1-3/8 inch thick... ... more

PRIMELINE TOOLS N 6517 Bypass Closet Door Top-Hung Back Rollers and Brackets (2

This is a side mount, top hung adjustable roller bracket with a 3/4 inch ball bearing convex nylon roller and 1/2 inch offset that fits onto the back wardrobe door panel. It fits 3/4 inch to 1-3/8 inch thick doors. •Used by a variety of by-pass door... ... more

PRIMELINE TOOLS N 6881 Bypass Mirror Door Bottom Track, 72 in., Roll-Formed

This bottom track is constructed from roll-formed steel and comes finished in champagne gold. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller... ... more

PRIMELINE TOOLS N 6877 Bypass Mirror Door Bottom Track, 72 in, Roll-Formed

This bottom track is constructed from roll-formed steel and comes finished in satin nickel. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller... ... more

PRIMELINE TOOLS GD 52107 Standard Hinge, #4 Position with Fasteners, 3 in. Wide

This heavy-duty hinge is constructed from heavy-duty 14 gauge steel. The roller tube accepts a standard 7/16 inch diameter stem roller. This style hinge is used by most garage door manufacturers. •Used by most garage door manufacturers •Easy to install... ... more

PRIMELINE TOOLS GD 52111 1-13/16 in. Diameter Steel Ball Bearing Heavy Duty

These heavy-duty garage door rollers are constructed of steel wheels and rods and they include steel ball bearings. The wheels measure 1-13/16 inch in diameter, the shafts are 6-13/16 inch long and measure 7/16 inch in diameter. Each roller is equipped... ... more

PRIMELINE TOOLS GD 52104 Standard Hinge, #1 Position, with Fasteners, 3 in.

This is a heavy-duty 14 gauge galvanized steel hinge. The roller tube accepts a standard 7/16 inch diameter stem roller. Used by most garage door manufacturers. #1 position and center. •Used by most garage door manufacturers •14 gauge galvanized steel... ... more

PRIMELINE TOOLS N 6876 Bypass Mirror Door Bottom Track, 60 in., Roll-Formed

This bottom track is constructed from roll-formed aluminum and comes finished in satin nickel. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller... ... more

Prime-Line Sliding Closet Door Roller Kit, 1 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction | Wayfair N 7532

This by-pass closet door repair kit includes four roller assemblies constructed of stamped steel brackets and plastic wheels. One pair of roller assemblies is for installation on the front sliding panels and have only a 1/4 in. offset. The other pair... ... more

Prime-Line Sliding Closet Door Roller Kit, 7/8 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction | Wayfair N 7537

This by-pass closet door repair kit includes four roller assemblies constructed of stamped steel brackets and plastic wheels. One pair of roller assemblies is for installation on the front sliding panels and have only a 1/4 in. offset. The other pair... ... more

Prime-Line Garage Door Roller, Steel in White | 8.63 H x 3.75 W x 2 D in | Wayfair GD 52140

These garage door rollers are constructed of steel rods and flat edged wheels, and they are assembled with brass bushings. These rollers fit Frantz doors and a variety of other garage door manufacturers use them. These rollers fit most sectional roll... ... more

Prime-Line Heavy Duty Standard Garage Top Roller Fixture Pocket Door Hardware in Gray | Wayfair GD 12153

This heavy-duty hinge is constructed from heavy-duty 14 ga. steel. The roller tube accepts a standard 7/16 in. diameter stem roller. This style hinge is used by most garage door manufacturers. | Prime-Line Heavy Duty Standard Garage Top Roller Fixture... ... more

Prime-Line Pocket Door Roller Assembly, 1 in. Outside Diameter, Convex, Plastic Tires, Steel Bracket (Single Pack) in White | Wayfair N 7410

This Convex Pocket Door Roller is constructed of a steel bracket and plastic tires. The wheels are constructed of durable plastic which provide for a smooth, long-lasting, quiet operation, and they feature convex (round) edges. These adjustable roller... ... more

Prime-Line Pocket Door Roller Assembly, 13/16 in, Convex, Plastic Tires, Steel Bracket & Ball Bearings (Single Pack) in Gray | Wayfair N 7065

This Convex Pocket Door Roller is constructed of a steel bracket and ball bearings with plastic tires. The wheels are constructed of durable plastic which provide for a smooth, long-lasting, quiet operation, and they feature convex (round) edges. These... ... more

Prime-Line Mirror Door Roller/Assembly, 7/8 in, Steel Bracket Housing, Convex in Gray | 1 H x 4 W x 7 D in | Wayfair MP6552

This mirror door roller assembly is constructed of a steel bracket housing and a convexed (round) edge, plastic wheel. The bracket height (not including the extending roller arm) measures 3-3/16 in. tall x 2 in. wide. This mirror door roller assembly... ... more

Prime-Line Steel Door Roller in Gray | Wayfair GD 52103

This is a standard door roller with a convex edge, suitable for use with 2 in. track garage doors. It has a 1-7/8 in. roller diameter, 1/2 in. roller width. Nylon ball bearing roller. Standard shaft length of 3-5/8in. | Prime-Line Steel Door Roller in... ... more

Prime-Line Garage Door Hinge, Steel in Black | Wayfair GD 12277

This is a heavy-duty 14 gauge galvanized steel hinge. The roller tube accepts a standard 7/16 in. diameter stem roller. Used by most garage door manufacturers, installs on the door at position #4. | Prime-Line Garage Door Hinge, Steel in Black | Wayfair ... more

Prime-Line Heavy Duty Standard Garage Hinge Pocket Door Hardware, Steel in Gray | Wayfair GD 52212

This is a heavy-duty 14 ga. galvanized steel hinge. The roller tube accepts a standard 7/16 in. diameter stem roller. Used by most garage door manufacturers. #2 position and center. | Prime-Line Heavy Duty Standard Garage Hinge Pocket Door Hardware,... ... more

Prime-Line Top Roller Fixture Pocket Door Hardware, Steel in Black | Wayfair GD 12229

This Prime-Line GD 12229 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

Prime-Line 1-13/16 Diameter Steel Door Roller in Gray | Wayfair GD 52113

These heavy-duty garage door rollers are constructed of steel wheels and rods and they include steel ball bearings. The wheels measure 1-13/16 in. in diameter, the shafts are 6-13/16 in. long and measure 7/16 in. in diameter. Each roller is equipped... ... more

Prime-Line Heavy Duty Short Stem Roller Spring Pocket Door, Steel in Black | Wayfair GD 12194

This is a heavy-duty steel garage door roller with steel inner race. It features 10 ball bearings and a short stem. Same as the Prime-Line GD 52111 but this has a shorter stem. | Prime-Line Heavy Duty Short Stem Roller Spring Pocket Door, Steel in... ... more

Prime-Line Torsion Spring Cable Set, Glass in Gray | Wayfair GD 52110

This garage door extension spring cable is constructed from galvanized carbon steel. It features a 3/32 in. diameter and fits on both single and double garages as well as glass doors. Two 8 ft. 8 in. cables with looped ends are included. | Prime-Line... ... more

Prime-Line Standard Hinge Pocket Door Hardware, Steel in Gray | Wayfair GD 52119

This is a heavy-duty 14 ga. galvanized steel hinge. The roller tube accepts a standard 7/16 in. diameter stem roller. Used by most garage door manufacturers. #1 position and center. | Prime-Line Standard Hinge Pocket Door Hardware, Steel in Gray | Wayfair ... more