Power Tools › Proxxon › glass cutting

Professional Rotary Tool IBS/E

Usable for extended periods when grinding polishing cleaning cutting and engraving. Ideal for mechanics model builders jewelers opticians artists and electronic enthusiasts. The tool comes with six high concentricity collets along with a collet nut as... more

Proxxon 38472 Precision Rotary Tool Set

Product Description 1001 uses for drilling milling grinding polishing brushing de-burring rust removal engraving carving and cutting. A special motor technology (no replacing of brushes necessary) with full-wave electronic speed control allows for... more

Precision Rotary Tool FBS 115/E

Performance at its best! The torque makes the difference! The smart alternative with keyless chuck. 1001 uses for drilling milling grinding polishing brushing de-burring rust removal engraving carving and cutting. Technical data: Speed 5 000 - 20... more

Carbide tipped blade for KS 115 20 teeth Ø 2

Tungsten Tipped Saw Blade Ø 2 x 1 3/8 arbor 13/32 (50mm x 1.1mm x 10mm) 20 teeth. For extremely clean cuts of balsa and plywood can also be used for cutting PC cards and polycarbonate. NO 28 017 Returns can only be accepted for unused product in its... more

Tungsten carbide burrs Flame 5/16 x 1/2

For wood processing: insertion tools with wolfram carbide burrs for model-making cleaning and smoothing of wood and glass fiber reinforced synthetics. Not suitable for metals! Extremely sharp and easy to work with; material is removed in a controlled... more

Crosscut blade Super-Cut for KS 115 Ø 2 9/32

Crosscut Blade Super-Cut Ø 2 9/32 x 1/64 x 13/32 (58mm x 0.4mm x 10mm) 80 teeth. Ideal for use on hard and soft wood as well as plastic. For fast clean cuts. The 80 teeth are alternately set and sharpened. For superior cutting power! NO 28 014 Returns... more

Silicon carbide mounted points 2 pcs. flame and taper

Designed for engraving and frosting of glass (finishing monograms) ceramics porcelain and stones. Also for use on cast steel cast iron and other hard steels. Contains fine particles of grit for consistent hardness. All shanks Ø 3/32 (2.35mm). NO 28... more

Disk Sander TG 125/E

A precision device for fine sanding work and minor material correction. For all types of wood steel non-ferrous and precious metals plastics (also Plexiglas and fiber glass). Comes with c-clamp. Technical data: Speed 1150 - 3600rpm (250 - 800m/min).... more

MICRO Bandsaw MBS/E

Perfect cuts in steel non-ferrous metals wood and plastic. Even cuts glass and ceramics. Comes with band saw blade. Technical data: Speed 395 to 820 ft/min (with feedback control). Throat Depth 5 29/32 (150mm). Max. work piece Height 3 13/32 (85mm).... more

Proxxon 28840 Diamond Cut Off Wheel

For cutting very hard and brittle materials: glass porcelain non-ferrous metals steel ceramics fiberglass and plastics. more

Milling cutters 3 pcs. (1/32 5/64 7/64 )

These double flute cutters are made from solid tungsten and are to be used for clockwise cutting. The fishtail profile ensures cutting to the center allowing boring. Usable on cast iron hardened cast iron steel cast steel brass aluminum and even glass... more

Proxxon 28732 3-9/64-Inch 80mm Carbide Tipped Saw Blade 36-Teeth

Proxxon 28732 3-9/64-Inch 80mm Carbide Tipped Saw Blade 36-Teeth Carbide tipped saw blade. Extremely clean cutting edges when cutting balsa wood plywood or soft wood as well as glass-fiber reinforced plastics (GRP) because of large number of teeth. May... more

Tungsten carbide micro drills 2 pcs. (Ø 5/64 )

Tungsten Carbide Micro Drills With ideal cutting angle of 6°. Especially for drilling in glass porcelain ceramics marble (also semi-precious stones) and other hard stones. All shanks Ø 7/64 (3mm). NO 28 328 Returns can only be accepted for unused... more

Tungsten carbide micro drills 2 pcs. (Ø 1/16 )

Tungsten Carbide Micro Drills With ideal cutting angle of 6°. Especially for drilling in glass porcelain ceramics marble (also semi-precious stones) and other hard stones. All shanks Ø 7/64 (3mm). NO 28 326 Returns can only be accepted for unused... more

Spare cutting wire for THERMOCUT 12/E

Replacement Cutting Wire for the THERMOCUT 12/E. Easy to bend therefore ideal for modeling. 10 pieces. NO 28 082 Returns can only be accepted for unused product in its original packaging. In addition to the returned item / items a copy of the original... more

3 piece thread cutting set (8 x 8 x 80 mm)

15/64 x 5/16 x 3 9/64 (6 x 8 x 80mm) for the PD 230/E. One cutter for external thread (ground to 60° metric) one for internal thread one general cutting. NO 24 540 Returns can only be accepted for unused product in its original packaging. In addition... more

5 piece cutting tool set (8 x 8 x 80 mm)

5/16 x 5/16 x 3 9/64 (8 x 8 x 80mm) for the PD 250/E. One each roughing out parting finishing cut left and right cutter. NO 24 530 Returns can only be accepted for unused product in its original packaging. In addition to the returned item / items a... more

Super Cut scroll saw blades for wood (no. 5 17 TPI) 12 each

High quality steel for extended use and prolonged cutting capacity. Standard version (without pin). Ideal for cutting Hard and soft wood plastics Perspex and soft non-ferrous metal. NO 28 117 Returns can only be accepted for unused product in its... more

Super Cut scroll saw blades for wood (no. 9 14 TPI) 12 each

High quality steel for extended use and prolonged cutting capacity. Standard version (without pin). Course blade ideal for cutting Hard and soft wood plastics Perspex and soft non-ferrous metal. NO 28 116 Returns can only be accepted for unused product... more

Proxxon 28818 Cut-Off Wheels - Aluminum Oxide 1-1/2

Aluminum-oxide cut-off wheels with reinforcement for cutting metal nonferrous metal alloys stainless steel wood plastics and some softer stones. more

Proxxon 28743 5-inch 18-Teeth Pin End Scroll 18T Saw Blades 12-Pieces

The 28741 5-Inch blades are designed for cutting soft and hard wood plastics as well as other soft materials and especially thicker work pieces. more

Proxxon 28810 Cut-Off Wheels - Aluminum Oxide 7/8

Synthetic resin bonded aluminum-oxide cut-off wheels for cutting metal nonferrous metal alloys stainless steel wood plastics and some softer stones. more

Proxxon 28820 Cut-Off Wheels - Aluminum Oxide 1-1/2

Synthetic resin bonded aluminum-oxide cut-off wheels for cutting metal nonferrous metal alloys stainless steel wood plastics and some softer stones. more

PROXXON Hot Wire Cutter/Handheld Foam Cutter THERMOCUT 12/E (27082)

NOTE: REQUIRES Micromot NG 2/S or NG 5/E transformer (not included) for operation. For free hand cutting in thick Styrofoam for diorama model railroad construction of any shape. Other application areas: Architecture modelling prototype construction for... more

Rotary Tool MICROMOT 60/EF

Perfect for milling drilling routing polishing cutting cleaning brushing deburring sawing engraving carving etc. With quick-action chuck. Practical for use with multiple shank diameters. Slim easily handled and light. Quick-action chuck and electronic... more

Longneck Angle Grinder LHW/E

Real alternative to pneumatic tools for grinding deburring roughing finishing - wherever working in tight spaces. It is also great for paint and rust removal cutting small components and sharpening tools. Technical data: Volts 110 - 120V AC 60Hz. Max.... more

Carving wheel with needle-like tungsten carbide teeth

Carving wheel with needle-like tungsten carbide teeth. Ideal for carving and sculpting roughing and finishing in wood plastics and fiberglass. Smooth cutting and excellent control. Maximum RPM 15 000. Do not use on metal. NO 29 050 Note: The Longneck... more

Rotary Tool MICROMOT 60/E

Perfect for milling drilling routing polishing cutting cleaning brushing deburring sawing engraving carving etc. A specially balanced motor makes this tool run very smoothly at variable speeds from 5 000 - 20 000rpm (no load). It comes with 6 high... more

Cordless Professional Drill/Grinder IBS/A w/o battery & charger

The new Cordless Professional Drill/Grinder IBS/A w/o battery & charger. For drilling milling grinding polishing cleaning cutting and engraving. Double-row ball bearing precision spindle of ground steel and six triple slit MICROMOT steel collets 1 -... more

Precision Drill Grinder FBS 12/EF

For precision drilling milling sanding polishing brushing rust removal engraving chiseling and cutting. Includes keyless chuck. Technical data: Direct voltage 12 - 18V. Maximum power consumption 100W. Speed 3 000 - 15 000rpm. Length 7.3 (185mm). Weight... more

Super Jig Saw STS/E

This tool offers fantastic cutting capacity with the footplate adjustable up to 45 degrees for miter cuts. Ideal for tight curves in wood non-ferrous metals and plastics. Technical data: Volts 110 - 120V AC 60Hz. Speed 2 000 - 4 500 strokes/min. Max.... more

Die holder for round dies threads M 3 to M 10

Sizes: M 3 - 4 - 5 - 6 - 8 - 10. The straight shank 13/32 fits our Drill Chuck (NO 24 020) when mounted in the tailstock of the PD 230/E. The holder is held by hand while cutting the threads. Comes in a wooden box. NO 24 082 Returns can only be... more

Band saw blade for MBS/E special tempered coarse (14 TPI)

Extra narrow Bandsaw Blade coarse toothed (14 TPI) 42 x 9/64 x 1/64 (1 065 x 3.5 x 0.4mm). Of special tempered steel with induction hardened teeth. Ideal for cuts in aluminum and plastics. Extremely narrow and thus optimal for cutting tightest curves... more

Rotary Tool MICROMOT 60

Perfect for milling drilling routing polishing cutting cleaning brushing deburring sawing engraving carving etc. Comes with 6 high precision triple slit steel collets in sizes 1 - 1.5 - 2 - 2.4 - 3 and 3.2mm (1/32 - 1/16 - 5/64 - 3/32 - 7/64 and 1/8 )... more

Band saw blade for MBS/E bimetallic 10/14 tpi

Bandsaw Blade of bimetal for MBS 115/E. 42 x 13/64 x 1/32 (1 065 x 6.0 x 0.6mm). Carrier belt of alloyed tempering steel sawing teeth of wear-resistant high-speed steel. Varying teeth 10 - 14 TPI. Ideal for cutting all standard steel qualities... more

Diamond blade for MBS/E

Diamond Blade 42 x 7/64 x 1/64 (1 065 x 3.0 x 0.3mm). Ideal for cuts in glass stone ceramic PC cards. Must be used in connection with the coolant kit. NO 28 186 Returns can only be accepted for unused product in its original packaging. In addition to... more