Home Hardware › Stainless Steel › Machine Screws › samsonite opto pc 2 20

1/4-20 x 2 1/2 Machine Screws / Slotted / Indented Hex Washer / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Indented Hex Washer. The head and washer are sometimes combined into a single unit. The built-in washer spreads out the clamping force of the fastener on the joint. In this case the top of the head... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Phillips Pan Head Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

2 pc Zoro Select 1/4 -20 x 1/2 in Phillips Pan Machine Screw Plain 18-8 Stainless Steel 5 PK

Machine Screw Head Type Pan Material 18-8 Stainless Steel Finish Plain Drive Phillips Thread Size 1/4 In.-20 Fastener Length 1/2 in Head Width 0.492 in Head Height 0.144 in Drive Size #3 Dimensional Standards ANSI/ASME B18.13 Pack Size Small Type... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Truss Head / 316 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Truss Head. Truss heads are wide with a low profile rounded top. more

1/4-20 x 2 1/2 Machine Screws / Phillips / Flat Head / 316 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

1/4-20 x 2 1/2 Machine Screws / Phillips / Truss Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Truss Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/4-20 x 2 1/2 Machine Screws / Phillips / Pan Head / 316 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Pan Head / 316 Stainless Steel (Quantity: 500 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used... more

MS51957-89 / 1/4-20 x 2 1/2 Mil-Spec Machine Screws / Phillips / Pan / 18-8 Stainless Steel / DFAR Compliant (Quantity: 500 pcs)

Pan Phillips Machine Screw Coarse Thread Tested and Certified to Military Standards 300 Series Stainless Steel more

1 pc Zoro Select 1/4 -20 x 2-1/2 in Phillips Pan Machine Screw Plain 18-8 Stainless Steel 25 PK

Machine Screw Head Type Pan Material 18-8 Stainless Steel Finish Plain Drive Phillips Thread Size 1/4 In.-20 Fastener Length 2 1/2 in Head Width 0.477 in Head Height 0.175 in Drive Size #3 Tensile Strength 60 000 psi Dimensional Standards ASME B18.6.3... more

MS51959-89 / 1/4-20 x 2 1/2 Mil-Spec Machine Screws / Phillips / Flat / 18-8 Stainless Steel / DFAR Compliant (Quantity: 500 pcs)

Flat 82 more

1/4-20 x 2 1/2 Machine Screws / Phillips / Truss Head / 316 Stainless Steel (Quantity: 500 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Truss Head. Truss heads are wide with a low profile rounded top. more

1/4-20 x 2 1/2 Machine Screws / Slotted / Pan Head / 18-8 Stainless Steel (Quantity: 600 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Fillister Head / 18-8 Stainless Steel (Quantity: 600 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Fillister Head. The Fillister Head has a rounded top surface cylindrical sides and a flat bearing surface. The greater side height is what distinguishes it from a Pan Head. It is the preferred head... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Oval Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Oval Head. Oval heads are countersunk (cone shaped under the head) with a rounded top. Also known as the raised counter sunk head this style has the signature conical bearing surface characteristic... more

1/4-20 x 2 1/2 Machine Screws / Slotted / Round Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Round Head. Round heads are domed and look like half of a sphere. more

1/4-20 x 2 1/2 Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Flat Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/4-20 x 2 1/2 Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel / Black Oxide (Quantity: 1 000 pcs)

Pan Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded Steel Black Oxide over 18-8 Stainless Steel more

1/4-20 x 2 1/2 Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

1/4-20 x 2 1/2 Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

1/4-20 x 1/2 Machine Screws / Phillips / Binder Undercut Head / 18-8 Stainless Steel (Quantity: 2 000 pcs)

Binding Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/4-20 x 2 1/2 Machine Screws / Phillips / Oval Head / 316 Stainless Steel (Quantity: 500 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Oval Head. Oval heads are countersunk (cone shaped under the head) with a rounded top. Also known as the raised counter sunk head this style has the signature conical bearing surface characteristic... more

1/4-20 x 2 1/2 Machine Screws / Slotted / Pan Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Pan Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/4-20 x 2 1/2 Machine Screws / Phillips / Round Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Round Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/4-20 x 2 1/2 Machine Screws / Slotted / Indented Hex Washer / 18-8 Stainless Steel (Quantity: 600 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Indented Hex Washer. The head and washer are sometimes combined into a single unit. The built-in washer spreads out the clamping force of the fastener on the joint. In this case the top of the head... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Truss Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Truss Head. Truss heads are wide with a low profile rounded top. more

1/4-20 x 2 1/2 Machine Screws / Phillips / Oval / 18-8 Stainless Steel (Quantity: 500 pcs)

Oval Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/4-20 x 2 1/2 Machine Screws / Slotted / Round Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Round Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/4-20 x 2 1/2 Machine Screws / Phillips / Fillister Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Fillister Head. The Fillister Head has a rounded top surface cylindrical sides and a flat bearing surface. The greater side height is what distinguishes it from a Pan Head. It is the preferred head... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Oval Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Oval Head. Oval heads are countersunk (cone shaped under the head) with a rounded top. Also known as the raised counter sunk head this style has the signature conical bearing surface characteristic... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Flat 82 more

1/4-20 x 2 1/2 Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 600 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

1/4-20 x 2 1/2 Machine Screws / Phillips / Flat Head / 316 Stainless Steel (Quantity: 500 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

1/4-20 x 2 1/2 Machine Screws / Phillips / Oval Head / 316 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Oval Head. Oval heads are countersunk (cone shaped under the head) with a rounded top. Also known as the raised counter sunk head this style has the signature conical bearing surface characteristic... more

1/4-20 x 2 Machine Screws / Slotted / Fillister Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Fillister Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/4-20 x 4 1/2 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel / Black Oxide (Quantity: 200 pcs)

Flat 82 more

1/4-20 x 1 1/2 Machine Screws / Square / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 1 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more